EN

About us

Notice

Download

Contact

Polemount Fault Interrupter

Overview

The BR-10EFI-DIR control is a superior model of the BR-10EFI-NC control that do not have a communication function, and is equipped with additional functions such as communication port and protocol for connection with the automation system, directional protective elements, and history management, etc.

The BR-10EFI-DIR control is connected with polemount fault interrupters or two-way padmount fault interrupters to function as an appropriate device required by the system. It can be operated as load break switch, sectionalizer, or fault interrupter controls, depending on the settings.

BR-10EFI-DIR controls with directional protective elements that can selectively protect according to the direction of fault will increase operational efficiency and convenience for lines where multiple power sources are connected, including distributed energy resources.

Key Features

Applications

Applications of BR-10EFI-NC control.

Used as a load break switch control for fast FDIR implementation through the built-in fault detection and protection operation by being integrated into an automation system.

Used as a fault interrupter control for selective protection according to the direction of fault on the main lines, branch lines, or the point of connection with the distributed energy resources.

Benefits

Effects of BR-10EFI-NC control.

Selective protection according to the direction of fault can be performed by using directional protective elements in lines to which multiple power sources are connected.

Remote control and status monitoring are possible by being integrated into an automation system through DNP3 protocol over serial or Ethernet.
Improve system operation efficiency by selecting a suitable operation method for the system through various operation modes.

Improve the efficiency of system operation by being able to select an operating mode suitable for the system.

Related Products

Tester for the BR-10EFI series control.

Polemount solid dielectric fault interrupter.

CT open protection & voltage divider board for fault interrupter.

BH SYSTEM249-14, Soltaesangdu-gil, Hyangnam-eup, Hwaseong-si, Gyeonggi-do, KOREA

  • 82-31-689-3211
  • info@bh-system.com

COPYRIGHT (C) BH SYSTEM. ALL RIGHTS RESERVED.

Designed by Molto.