The BR-10RK control is a recloser control installed in combination with the recloser on 25.8kV overhead distribution networks with multi-earthed neutral.
The BR-10RK control is an integrated control device that performs various functions such as electrical quantity measurement of distribution line, status monitoring of connected recloser and distribution line, line fault detection and protection, communication, and battery management.
The enclosure is equipped with a microprocessor-based control module that performs main functions, capacitor banks that store energy to drive the magnetic actuator, and a drive module to charge capacitor banks and drive MA coils with stored energy. In addition, AC/DC power input module, battery, voltage calibration board, battery testing terminal, brackets for modem installation, and auxiliary DC supply are provided.
The BR-10RK recloser control is designed and manufactured to meet KEPCO standards.
Used as a traditional recloser control to protect lines on radial distribution networks.
Used as a recloser control to integrate reclosers into distribution automation systems.
Realization of fast and highly reliable FDIR by being integrated into distribution automation systems.
Improvement of supply reliability and operational efficiency in distribution networks through distribution automation systems.
Minimization of outage sections and duration through coordination between reclosers and load break switches integrated into the distribution automation system.
BR10-PR series solid dielectric recloser.
Tester for the BR-10RK recloser control.
MA drive module and AC/DC power input module.
CT open protection & voltage divider board for recloser.
BH SYSTEM249-14, Soltaesangdu-gil, Hyangnam-eup, Hwaseong-si, Gyeonggi-do, KOREA
COPYRIGHT (C) BH SYSTEM. ALL RIGHTS RESERVED.
Designed by Molto.
