The BR-10SN control is an integrated control device installed in combination with the polemount load switch or sectionalizer on MV overhead distribution lines.
The BR-10SN control is separately composed of a control module and a surge protection module to protect it to reduce the possibility of damage to the control module due to an external electrical surge. Therefore, it is possible to provide users with improved maintainability and reduced maintenance costs.
The BR-10SN control has an extra output contact to drive the solenoid coil, which can be connected to devices employing DC solenoid actuators such as sectionalizers
The BR-10SN control is equipped with auxiliary input and output contacts, buttons, and indicators that can be used by the user.
Applications of the BR-10S control.
Used as a control for the polemount load break switch or sectionalizer on distribution lines requiring directional protective elements or directional fault detection.
Used as a control for the polemount load break switch with automatic re-closing function to supply power again when power quality is restored after the polemount load break switch is opened by load shedding function.
Used as a control to control the polemount load break switch through control signals from other devices using auxiliary DI and DO contacts.
Effects of the BR-10S control.
Reduce system implementation cost and improvement of system reliability by supporting various communication networks suitable for site situations.
Reduce system management cost and active management of power quality through the load shedding function with automatic re-closing function.
Tester for the BR-10S/SN control.
BR10-PS series polemount SF6 gas insulated load break switch
BR10-SPS series polemount solid dielectric load break switch.
Polemount SF6 gas insulated sectionalizer
BH SYSTEM249-14, Soltaesangdu-gil, Hyangnam-eup, Hwaseong-si, Gyeonggi-do, KOREA
COPYRIGHT (C) BH SYSTEM. ALL RIGHTS RESERVED.
Designed by Molto.
