Load Break Switch
Switch Unit · Integrated Control
The Load Break Switch for overhead lines is divided into SF6 or solid insulated type depending on an insulation method. Also, it is divided into motorized type (operated by electrical signal) and manual type (operated by the operator).view more
Recloser Unit · Control Unit
Automatic Circuit Recloser for overhead lines is divided into SF6 or solid insulated type depending on an insulation method.view more
Switch Unit · Control Unit
The Sectionalizer is distribution equipment installed on the medium voltage distribution network with protection devices such as the Recloser and the circuit breaker. It is a kind of open circuit switch which is used to isolate faulty sections from the system.view more
Over Current Relay
OC Relay · Controller
BH System has the dedicated Relays that are installed and operated in the Ring Main Unit on the distribution network or the Circuit Breaker for multi-circuit.view more
The Automatic Load Transfer Switch is installed on the major load of three phases or inside of the customers, and two medium distribution networks are connected to this switch. The ALTS is composed of two switches and three high voltage terminals for connection.view more
Test Set & Accessories
Test Set · Accessories
Test sets are the devices used to check whether the controls are normally operating, perform maintenance, or simulate the operations of distribution networks when needed.view more
For LBS · For Disconnecter
The Electrical Controls are the devices used to check the status of the distribution equipment on sites or for electrical operation.
It performs a function that it matches signals to interface between distribution equipment and devices which are for remote monitoring and control such as RTU.
If you send us any questions about our products, we will send you an answer by e-mail.